Get Ahead with Our Exam Q&A

Explore our extensive collection of questions and answers to enhance your learning experience and prepare for exams effectively

Index Mode is used to access an array whose elements are in successive memory locations. The content of the instruction code, represents the starting address of the array and the value of the index register, and the index value of the current element.

A friction clutch plate is used in vehicles to allow the transmission input shaft and engine to run at the same speed when rotating. … When the clutch is engaged, the friction plate is sandwiched between the engine flywheel and a steel pressure plate that is bolted to the flywheel.

As frequency increases, the flux density in the core decreases .
The iron loss is directly proportional to the frequency.
Effect of increased frequency will be reflected in increase of the iron losses.

Buchholz relay is used for the protection of transformers from the faults occurring inside the transformer.
Short circuit faults such as inter turn faults, incipient winding faults, and core faults may occur due to the impulse breakdown of the insulating oil or simply the transformer oil.

The salient pole type motor is generally used for low and medium speed prime movers.
They cannot withstand the mechanical stresses developed at high speed. The projecting poles may be damaged due to mechanical stresses.
Poles are laminated to reduce eddy current losses.

8’s complement of a number is 1 added to it’s 7’s complement number.

7’s complement of 240 is

7 7 7 – 240 = 5 3 7 .

Now add 1 : 537 1 = 538.

A manometer is a scientific instrument used to measure gas pressures. Open manometers measure gas pressure relative to atmospheric pressure. A mercury or oil manometer measures gas pressure as the height of a fluid column of mercury or oil that the gas sample supports. All others measure pressure difference.

Chaplets: Chaplets are used to support the cores inside the mould cavity to take care of its own weight and overcome the metallostatic force. Riser: A column of molten metal placed in the mould to feed. the castings as it shrinks and solidifies. Also known as ?feed.

Crashing is the technique to use when fast tracking has not saved enough time on the schedule. It is a technique in which resources are added to the project for the least cost possible.Crashing is another schedule compression technique where you add extra resources to the project to compress the schedule.

Variables control charts are used to evaluate variation in a process where the measurement is a variable–i.e. the variable can be measured on a continuous scale (e.g. height, weight, length, concentration). There are two main types of variables control charts. One (e.g. x-bar chart, Delta chart) evaluates variation between samples. Non-random patterns (signals) in the data on these charts would indicate a possible change in central tendency from one sampling period to the next. One way of thinking about the use of a variables control chart is that you are testing the hypothesis that a particular sample mean came from the population of sample means represented by the control limits of the process. If the particular sample mean is within the control limits, your concusion is that it does come from that population. If the particular sample mean is outside the control limits, you conclusion is that it may have come from some other distribution (i.e. a distribution with a mean that is higher or lower than this population mean. [NOTE: There are other signals that may indicate an out-of-control signal that will be discussed in the Lesson Six Presentation.]

The other type of variables control chart (e.g. R-chart, S-chart, Moving Range chart) evaluates variation within samples. Non-random patterns (signals) in the data on these charts would indicate a possible change in the variation within the samples.

Get Expert Advice for Free: Register for Your Free Consultation Now!

Full Name

Phone Number

Select Language

Select Course

[honeypot honeypot-100]