Explore our extensive collection of questions and answers to enhance your learning experience and prepare for exams effectively
In engineering, a factor of safety, also known as safety factor, expresses how much stronger a system is than it needs to be for an intended load
One complete cycle is 360 electrical degrees.
Slip in the belt drive is a phenomenon of the relative motion between belt and pulley. Due to insufficient grip of friction between pulley and belt, there are some relative motion in between those two is present, this motion is called slip of the belt
The pulleys are known collectively as the jockey wheels or jockey pulleys, the guide pulley is at the top of the pairing (closest to the sprockets) and the tension pulley is at the bottom, taking any slack up from the bike chain as it is fed from one of the chainset’s chain ring.
For Pipe electrode internal diameter shall not be smaller than 38mm if made of galvanized iron or sheet and 100mm internal diameter if made of cast iron electrodes and shall be embedded below permanent moisture level.
For Rod electrode of the sheet or galvanized iron shall be at least 16mm in diameter and those of copper shall be at least 12.5mm in diameter.
BY 127 is a diode
Pure silica gel has blue colour. Blue silica gel has cobalt chloride, which allows the blue silica gel change its color to pink when it reached its maximized adsorption capacity. Once pink it can be reactivated with heat to dry out the moisture. When it turns blue again, it’s ready to use.
Skin effect is the increase in the current density near the surface of solid conductors due to non uniform distribution of variable currents.
Joule effect refers to the heating that occurs when an electric current flows through a resistance
Corona discharge is an electrical discharge brought on by the ionization of a fluid such as air surrounding a conductor that is electrically charged.
Eddy currents are loops of electrical current induced within conductors by a changing magnetic field in the conductor according to Faraday’s law of induction.
Moving Iron (MI) instruments reads RMS value.
Permanent magnet moving coil (PMMC) instruments reads average values.
ARRAY command can used in AUTOCAD to duplicate existing objects in a circular pattern ?