Table of Contents
The phrases wires and cables are often used interchangeably, however they consult with wonderful electric components. Using one in place of the other probably wouldn’t confuse the average character, however there are critical differences among the 2.
In preferred, a cable is made of a couple of wires, which can also be used on their own. Of route, the distinction is more nuanced than that, however it offers us a good start line. Wires and cables are available many different sorts and might accommodate similar or particularly specialized demands. Understanding the distinction is important if you want to make the right choice.
Elevate your career with our comprehensive MEP Course! Get Free Demo Here!
Basic Difference Between Wires and Cables | ||
Wires | Cables | |
Classification | Single conductor | Two or more conductors |
Uses | To enable devices to be equipped, and to transmit electrical telecommunication signals. It is also used in heating, jewelry, clothing, bait, automotive or industrial products, pins, knives, fishing line and bulbs. | To allow electronic communication, and to transmit electronic telecommunications signals.
|
Types
|
1. Solid wire
2. Stranded wires
|
1. Twisted pair cable
2. Multi conductor cable 3. Coaxial cable 4. Fiber optic cable |
Advantages
|
So thick cables offer low resistance, so they are perfect for high frequency use. Stranded wire shows great resistance to metal fatigue. | High strength, heavy duty, and insulated.
|
Wires
As mentioned earlier, a wire is a conducting wire or conductor, which is insulated with an insulating jacket to prevent unwanted contact with the conductor Usually consumed with wires use to transmit electrical telecommunications signals; but can also be used for mechanical conveyors. There are basically two types of fibers, namely solid and knotted. Solid wire is actually a long length of a single conductor, but wired wire is made up of many thin wires with conductors twisted together Solid wire offers low resistance and is best used at high frequencies. Stranded wires are more flexible and therefore, have a longer life. Also, gutted cables have a better cross-sectional area than solid cables for the same current carrying capacity.
Single-Conductor Wire
Single conductor wire is copper wire, either pillared or solid core, covered with PVC insulation and covered with cotton or rayon braid All our wires except our 12-gauge single-conductor knob & tube wire have been continuously produced.
A wire has a conductor in the middle and is mostly made of metal because of its high conductivity. However, some metals are more permeable than others. Aluminum, copper, and high-strength alloy are the main materials you will find in your wire and cable hub. Each of these metals come in different types and levels of conductivity so it’s important to be aware of how they might affect your next cable or wire project.
Material Composition
Aluminum
Conductors made of aluminum are lightweight, cost-effective and versatile. Although aluminum is less expensive than copper or iron alloys, the flow of aluminum also decreases.
Copper
Copper cables conduct electricity very well and are inexpensive and widely used. Bare copper is most commonly used, but copper tubing can also be tinned or silver plated to improve performance.
Steel
Steel is also a common choice for conductor. However, steel is less common than aluminum or copper because steel also does not conduct electricity. In conventional conveyor belts, copper-coated steel is used to ground the cables or when an application requires wire with special mechanical properties.
High-Strength Metal Alloys
High-strength composites are typically conductive materials made of one or more metallic materials. Combinations are often stronger than controls alone. High-strength alloys are usually plated with silver or nickel.
Types of Wires
1.Stranded Wire
Wire used in electrical applications incorporates many twisted or twisted metal wires, which gives it flexibility compared to solid wire Usually made of copper or aluminum, ideal for situations where it requires constant bending or movement. This versatility makes wire important in power cords, speaker cables, and other applications that require flexibility and durability
How is Stranded Copper Wire Made?
The copper tubing is stretched or assembled into a larger gauge wire by twisting various smaller gauge tubes. There are various processes involved in the production of captured copper which include drawing and also annealing of the individual fibers and then, these are wound around the central wire with the help of a machine
Advantages of Stranded Wire
- Flexibility: Stranded wires are more flexible making them the ideal choice for situations where wires need to be bent or twisted. This makes it easier to run pipes and drains into walls.
- Current Flow: The air gap between the wires ensures that current flows safely through the wires. This dissipate the heat generated by the current flow.
- Repetitive Motion: When using repetitive movements, such as opening and closing doors, stuck wires find their place. They are ideal for short distances and easily fit on coiled cables.
- Reducing Skin Effect: Wire line can be selected to reduce the skin effects of AC transmission lines and distribution lines. Stranded Wire Faults
Disadvantages of Stranded Wire
- Corrosion Risk: Ties can easily be damaged, especially in humid climates and outdoors.
- Lower Ampacity: The radiation between the conductors of the entrapped wires results in less current transfer than a solid wire of the same size
- Higher Cost:Cables with congested systems tend to be more expensive than stable ones.
- Voltage Drop: Voltage drop in stranded wires can be significant, and noise can be produced with 20-50% attenuation in high frequency connections
2.Solid Wire
Solid wire refers to a single conductor covered with insulation. It is bigger and bulkier than a binding line. While wire ties have some advantages, solid wire remains in its place, especially in domestic wiring for mains panels and other applications.
Process of Manufacturing Solid Copper Wire
Initially, to produce a thicker copper wire, copper rods are drawn through a series of dies that are progressively reduced until specific measurements are reached This process of rolling thins the copper and it’s easy. This is followed by annealing, where the wire is heated to increase its density and strength. The wire is then ready to be used as bare lead or for a variety of applications such as telecommunications, pet fencing or tracer wire
Advantages of Solid Wire
- Pure Termination: With solid wiring, you have complete termination and connection resulting in an efficient electrical system.
- High Current Carrying Capacity: Thicker wires can carry more current than wires with air gaps between conductors of the same gauge.
- Transparent Sound: With minimal attenuation resulting in low noise levels, these lines are ideal for applications that emphasize high frequency transmission
- Resistant And Durable: The resistance and corrosion properties make hard wire reign over other types for indoor as well as outdoor use.
- Less Voltage Drop: Low voltage drop is due to low resistance of hard wires for remote purposes.
- Cost-Effective: Solid lines are generally cheaper than their captured cousins.
Disadvantages of Solid Wire
- Less Flexibility: Solid cables are not as flexible as captured cables and are therefore not suitable for applications requiring flexibility.
- Repetitive Motion Concerns: Using hard wires in conventional movements can cause wire damage.
- Skin Effect in High Voltage Lines: In high voltage power transmission lines can have problems with the skin effect of hard wires.
- Not Suitable for Electronics: However, thicker cables may not be suitable for electronics, digital communications and computer applications due to their lack of flexibility
Click here to learn more about the MEP design course offered by the Entri app! Join now!
Cables
Typically, two or more threads form two or more threads that are connected or twisted, twisted or knotted. Most are insulated to provide better protection than wires alone. Cables are widely used in electrical communication and in the transmission of electrical and telecommunications signals. There are several types of cables, namely, twisted cables, coaxial cables, multi conductor cables, and fiber optic cables. When we talk about twisted cables, they are two cables twisted together and are mostly used to carry signals.
A multi conductor cable, on the other hand, consists of a number of conductors disconnected from each other and is used to protect signal integrity by reducing resonance, noise and crosstalk Ndalen helps in transmitting signals. These cables have higher bandwidth than metal cables, which means they can carry more data.
Cable Insulation
The cable insulation/jacket prevents current from flowing into surrounding cables and other conductive materials. This line protects it from environmental uncertainty. In bulk Ethernet cables, this is different. For example, risers, PVC and aircraft.
Now, the aforementioned jackets are not the only types of insulation. Sheaths under the outer jacket also form a type of insulation that prevents drivers from experiencing electromagnetic interference (EMI) external crosstalk, as well as internal crosstalk.
Following are the three main types of cable insulation, also known as jackets.
Plenum
The Communications Multipurpose Plane (CMP) is an overhead cable jacket with performance and standards that mean the highest level of fire protection. It is made of self-extinguishing materials to prevent it from burning at high temperatures. However, in the unlikely event of a fire, it will not emit toxic fumes. This type of insulation is designed for plenum interior areas where air circulates freely such as dropped ceilings, raised floors, and so on.
Riser
Communication Multipurpose Riser (CMR) is also a high-quality cable insulation designed to perform in extreme conditions. It is highly resistant to high temperatures and prevents it from spreading in the event of a fire hazard. Ethernet cables with this insulation should be installed in risers such as elevator shafts, floors, and walls.
PVC
PVC is the most economical bulk Ethernet cable insulation. It makes sense to use it outside but should not be used for running cables inside. For example, this type of insulation is used in cables connecting IP cameras, ATMs, etc. on a LAN network.
Sheathing
A cable sheath wraps around the outside of the cable to hold and protect the conductors inside. Sheaths are used in cabling for electrical connections, telecommunications, and other applications. Different types are available for controlling voltage settings. These include heavy-duty coatings for high-voltage electrical cables and small components for internal handling of telephone cables for homes and other buildings Cable manufacturers may produce their own coatings or contractors especially in insulation.
One function of the sheath is to help tie the conductors together when there are multiple wires in the cable. They can also be filled with lubricants or insulation to protect the drivers. The lines are impervious to rain, snow, and other environmental factors with intact covers, reducing the risk of shorts and other problems Line covers also hit passersby and workers protected by high-powered lines that can be connected directly.
Sheathing may include weatherproofing and weatherproofing. Sheath design considerations include how much energy the cable will consume and where it will be used. Potentially hazardous systems may require heavy insulation, such as outdoor areas and high voltage wired electrical equipment. This cable sheath would be excessive for situations like home speaker wire, which doesn’t hold enough voltage to pose a serious hazard, and for use in relatively sensitive indoor environments
Over time, the implants can fracture. This can also be caused by weather and stress; For example, fibers can bend in the wind and streak, or eventually deteriorate when constantly exposed to UV or salt. Fault detection systems can detect cracks and determine if internal wiring is damaged. It is possible to use cleaning products to repair the mask, in other cases the length of the cable is damaged and needs to be replaced.
Technicians can also trim, repair, and other work to the cable cover. Special cutting tools are used so that the outer cover and protective layer can be easily pulled into the line For safety, the tool can have a non-yielding handle strength of the cables when the engineer is working on them . Such equipment comes from industrial power suppliers and similar companies.
Raw material plays an important role in that and our TPE raw material is your best bet for the best cable sheath. These materials are specially designed to meet industry needs, so they are basically free-flowing and scratch resistant, providing excellent thermal stability and excellent “wet grip” Due to special compression group values, TPEs are used for example in terminal protection elements. We also offer fire retardant materials that are removable and widely used in cable sheathing. In addition we offer thermoplastic elastomers that comply with German and British drinking water regulations, and can therefore be used in products such as shower heads
Different Types of Cables
The classification of cables is based on the color and electrical properties of the wire. The DC current displays the wires in three different colors: red, black and white. The red wire conducts positive current while the top is used to carry negative current. The gray or white wire indicates a ground wire. For AC current, black indicates the first side and is used for power generation, red is the second side for transmission wires, third side is for power distribution and white is the neutral wires In an AC circuit, green is used wire and acts as the ground wire.
Cables are also classified into 5 different categories namely
- Ribbon Electric Cables: These lines are a series of encrypted lines that remain in parallel and are primarily used for simultaneous transmission of large amounts of data. For example, this wire is often used to connect the CPU to the motherboard.
- Twisted Pair Cables: This type of cable is more insulated than twisted copper wire with other colored cables. It is primarily used as a telephone calf and the tension resistance can be measured with these lines.
- Coaxial Cables: This cable consists of solid copper and metal conductors connected by metal braid or tape. Such cables are completely encased by an insulated protective outer jacket and are also used for computers and audio-visual communications.
- Shielded Cables: This cable consists of insulated type wire and is covered with woven braided shield and aluminum mylar foil. It is used to smooth the transmission of signals and remove power and frequency dependent irregularities. Such lines carry high voltage and are shielded.
- Fiber Optics Cable: This type of cable is very useful for transmitting optical data signals from small areas. Different functions can be found for this string.
The Structure And Construction Of Wire And Cable
Most fibers and fibers consist of uniformly shaped components (ignoring manufacturing defects) and long fibers, which are used as fibers or fibers with structure or in a machine determined.
Therefore, it is necessary to investigate and analyze the configuration of the cable materials, and only observe and analyze them from the cross section.
The materials used in the manufacture of wires and cables can be divided into four basic building blocks: wire, insulation layer, shielding and covering layers, as well as fill components and tensile components.
Depending on the requirements and applications, the design of some products is quite simple.
(1) Wires Streams are the most important and critical elements of an object for the transmission of current or electromagnetic wave information.
Wire is short for conductive wire core, and non-ferrous metals use copper, aluminum, copper iron, copper aluminum and optical fiber as wires
(2) Insulation is an electrically insulating material around the wire.
That is, it can ensure that transmitted current or electromagnetic waves and light waves do not flow outwards but simply through the wire, and the conductor can be isolated on potential (i.e. potential difference caused by the surrounding medium i.e. voltage).
That is, proper wire connection must be ensured. job, but also ensure the safety of external resources and people.
Wire and insulation are the two main materials available for cable material (besides bare wire).
(3) Shielding is a process that insulates the electromagnetic field of the product line from external external electric fields.
The cable object must also be isolated from each other between its pairs (or groups).
The shield can be called an “electromagnetic isolation film”.
A conductor shield and an insulation shield of the high voltage cable are used to equalize the electrical distribution.
(4) The jacket layer shall be the protective member of the entire product, especially the insulating layer, when the wire and cable product is installed and used in different environments. This is the sheath level.
Since insulation materials require a high level of electrical insulation, the purity of the materials must be very high.
Pollution was minimal; Often, the ability to protect themselves from the outside world cannot be measured, hence the external environment (i.e. installation, operation, and use).
Mechanical resistance or resistance, weather resistance, chemical or oil resistance, biological damage prevention, and fire hazard reduction should be covered on the various layers
(5) Filling Structure Many wire and cable products are multi-core.
When these insulated channels or pairs are wired (or grouped into multiple wires), the shape is not circular, and the insulation core is a very large channel, so some additional wiring system is required the is about.
The filling system should slightly curve the outer diameter of the fibers to facilitate clamping and squeezing of the filler.
6) Attraction. Typical materials are steel core aluminum cables, fiber optic cable cables and so on.
In short, tension plays an important role in products developed in recent years and is particularly light and flexible, requiring repeated bending and twisting
Main Applications Of Wires and Cables
1.Power system
The wires and cables used in the power system are mainly bare overhead wires, bus wires (bus lines), electrical wires (plastic wires, oil-paper wires (replaced by plastic power lines). size), rubber cables, overhead cables.insulated cables ), and branch cables.
It exchanges (some bus lines), magnetic wires, electric motors, and wires and cables for electrical equipment.
2 Information Transmission System
Cables and wires used for information communications systems are basically local telephone lines, television cables, electronic cables, radio frequency cables, optical fiber cables, data cables, power cables, electrical communications or other composite cables
3 Mechanical Equipment, Instrumentation System
This part is used for almost all products except overhead bare wire, but especially power cable, magnet wire, data cable, instrumentation cable and so on.
Advantages and Disadvantages of Wire
Advantage of Wires
An important feature of any material used in electrical wiring is that it is easy to customize. Copper is a good conductor of heat and electricity, acting in its favor. Compared to other metals, silver seems to be the only metal that acts as a positive. Its conductivity is the main reason it is found everywhere.
Copper is heat resistant and highly malleable, making it an excellent material for a variety of electrical and thermal components. It is also a good conductor of heat, so it is used in corrosion resistant coatings.
Adjustments are required to obtain the correct shape and size. The malleability of copper indicates its flexibility, and it is high. Copper is used in a wide variety of electrical applications because thin wires of any size and shape can be wound or wired anywhere.
Its materials provide high shear resistance due to its ductile nature. Because of its malleability, copper is beaten into thin wire. It should not be smooth when stretched along the seams.
Disadvantages Wires
Copper tubing has many drawbacks, and other materials may be preferred as alternatives.
The main character of Thunder is about electricity. Copper wire is not as stable as electricity so higher voltages are used in the automotive industry than copper wire.
When copper wires are used, they form a barrier around themselves. This area can interfere with any transmission and interfere with safety. Fiber optics are used instead of copper cables to ensure better signal transmission.
Advantages and Disadvantages of Cables
The advantages and disadvantages of cables are as follows.
The main benefits are:
1. The reliability of this power supply is compounded by influences from external sources (such as lightning, wind damage, bird damage, etc.).
2. The power lines are buried underground and the project is concealed, so it has little impact on the cityscape and the environment. Even if an accident does occur, personal safety will generally not be affected.
3. The capacitance of the cable is greater, which can improve the line power factor.
The disadvantages are:
1. The high cost, one-time construction capital, and capital investment of cable lines is approximately 10 times higher than that of overhead lines of the same capacity
2. It is difficult to branch the cable.
3. Faults are inaccessible and not easily dealt with in the event of an accident.
4. The method of threading is complex..
Cable and Wires Selection Guidelines
Following these eight electrical wiring/wiring tips will help meet your unique needs, down to the smallest detail:
- Mechanical durability
- Electrical performance
- Flexibility
- Heat, flame, & cold resistance
- Corrosion resistance
- Processability
- Price
- Availability
1. Mechanical Durability
Many of the star’s properties influence its energy, starting with its size and protection level.
Mechanical measuring lines indicate size. Today’s consumers demand smaller and smaller sizes, which makes it a little more difficult to handle the physical features of cable displays. The thin wires are easy to cut or break but there are ways to add protection:
Jacketing/ Insulation to Try |
Armoring to Try | Conductor to Try | Filler to Try |
|
Crush resistance | Polyethylene, Neoprene, nylon, thermoplastic rubber | Steel | Steel | Steel |
Cut-through resistance | Nylon, TPE, fluoropolymers, XLPE |
Steel | Nickel-plated | Polyimide tape |
If your lines are at risk of being stepped on, run over, or cut, avoid installing jackets and insulation with substandard devices. Some things to stay away from are:
- PVC
- Thermoplastic rubber (for cut-through resistance)
- Paper (for filler)
2. Electrical Performance
There are two main factors that make an electrical wire work under “normal” conditions (no chemical fires, unexpected leaks, etc.) – its length and its shielding
The size requirements vary by the house, with “how long?” being a “how long?” question. question. It may be your only question. There are all electrical cable guides dedicated to sizing best practices for the factory floor.
Gauge is also important, as thicker cables generally have less resistance and can handle higher electrical loads over long distances. Consider the current requirements of your application and choose a gauge that can carry it safely without overheating or losing power.
Length is also still important, but it goes beyond the physical width of its connection points. The cable’s signal degrades as it travels, so very long cables are vulnerable to high-loss applications.
Oversized cables are also a waste of money, so buy only what you need. That said, if your assembly can change location or expand later in the project, add some slack and maybe a service loop.
Meanwhile, shielding is primarily dedicated to preserving the conductive capacity of the cable.
Electromagnetic interference (EMI) is the enemy of power lines, as it causes cross-talk (noise) and signal degradation. Shielding is a conductive layer that reduces EMI by acting as a barrier. This can prove to be a cost-effective arrangement, as it helps the signal travel farther with fewer wires before it decays.
Determine end-use space in your project and whether adjacent elements play nicely with each other. If you have 20 induction heating machines or automatic conveyors in one room, dialing in a particular frequency will be difficult due to cable cross-talk. When spec’ing cables for traffic signals, shielding is unnecessary because only air will circulate around them.
3. Flexibility
Your needs in this section largely depend on how you want to use the cable. The advantages of flexible mechanical lines are:
- Fits in tighter spaces
- Less likely to snap
- Easier to use
Consider the flexibility of your device, as not all connections need or have to be flexible. It makes sense to use flexible cables for a robotic arm that moves around all day. It is easy to configure the solid line section to your liking while maintaining its set, making it useful in metal-bending applications. In high-power systems, such as computer systems, thick wiring often provides the highest level of performance. They’re also cheaper (usually), so if cable flexibility doesn’t apply to your project, that’s probably the way to go.
The shield (if any) of a cable is the biggest factor in its elasticity, with the spiral shield being the most sensitive. Jacket liners and insulation are also important, with thermosets and rubbers offering the most flexibility. Last and probably least is driver type, with wired drivers being the most sensitive.
Some threads have additional flexibility:
- Cotton
- Aramid fiber
- Paper (note this is flexible, but has a short flex life)
4. Heat, Flame, & Cold Resistance
Some types of electrical wires and cables can endure high heat, some thrive in freezing temperatures, and a few excel at both. Meanwhile, some cables are popular because they don’t emit toxins while burning, while others are popular because they’re not flammable to begin with.
Choose cables that have the right temperature and fire rating for your application.
- High Temperature – Improperly labeled cable turns to mush, causing mechanical problems, conductor overheating and insulation cracking.
- Fire – UL examines wiring for circuit integrity during a fire, and for any smoke, toxic fumes, or corrosive materials produced during combustion
- Cold temperatures – Some materials soften, lose flexibility, or otherwise deteriorate.
The choice of cable jacketing and wire insulation is the #1 winning or losing factor when comparing hot and cold:
Hazard | Good Examples | Bad Examples |
Heat 🌡️ |
Silicone, fiberglass, PVDF, FEP (Teflon), PFA |
PVC, Neoprene, SBR |
Flame 🔥 |
Thermoset materials, CEP (thermoplastic), FEP (Teflon), (PVDF), silicone | Polyethylene, PVC |
Cold ❄️ |
Thermoplastic elastomer (Santoprene), PTFE, EPR, PFA, silicone |
PVC, polyurethane, polyethylene, rubber |
“Extremely resistant” is a relative term, so consult with your cable and wire distributor for the best balance of requirements and budget. The “highly resistant” version of the inner tube may not be enough for military submarines.
5. Corrosion Resistance
Industrial corrosion takes many forms: water, chemicals, oils, and UV light. Consider how to get corrosion resistant lines:
- in which corrosive materials may be present
- Determining the rate (strength) of the decomposition product
- How long can the exposure last
The coating of the seams will be impressive here, ideally keeping the assembly safe and reliable for years to come.
Moisture
- Hazards: Reduced insulation integrity, conductor corrosion, short-circuiting, and power failure.
- Solutions: TPU, cross-linked polyethylene (XLPE), polypropylene
Chemicals
- Hazards: Corrosion, mechanical and electrical loss
- Solutions (depending on specific chemicals involved): FEP, PTFE, TPEs such as Santoprene
Oil
- Hazards: Swelling, corrosion, corrosion, power loss, failure
- Solutions: Polyurethane, EPR, silicone rubber
UV
- Hazards: Insulation damage and tears, reduced electrical efficiency, corrosion, and insulation failure
- Solutions: XLPE, TPE, EPR
6. Processability
This one’s about efficiency of production.
- Will the wire require processing such as stripping or cutting?
- Will processing be done by hand or with an automated machine?
- Will your desired cabling be easy to strip or terminate?
Consider the strippability of potential cable purchases to save time and effort during fabrication, installation and maintenance. The last thing you want is to automate the process, only for the mill to be slow to disconnect any wire that enters the machine.
Some cables have specially designed insulators that allow them to disconnect effortlessly.
- EPR (ethylene propylene rubber)
- Silicone
- Polyurethane
- Other thermoplastics
Note that the hardness of some materials, such as PVC, can vary from manufacturer to manufacturer and can affect manufacturing flexibility. Different devices may give different results, but these differences can usually be overcome by equipment modification.
7. Price
Cost shouldn’t be the only factor in purchasing control supplies and other cables, but it is an important consideration (unless your budget is limited).
Consider the needs of your design, your financial manager, and your client:
- Specifications – Match your input level with the voltage rating, flexibility and length caliber you need.
- Durable performance – If you’re building equipment whose failure could cause damage or death, don’t buy yourself the cheapest wire. Even in low-risk situations, it can be much more cost-effective to purchase expensive cables that will last longer in steep terrain. Don’t forget to include the cost of maintenance and downtime.
- Sourcing partnerships – Trust a full-service distributor with experience in your market. It can recommend cheaper options, prepare for increased demand so you don’t overpay, and deliver steep discounts.
No one wants to tear it up, but when you get heavy lines, you need heavy equipment and technology. They come with a cost.
8. Availability
Make sure your spec cable items are flexible in terms of your quantity requirements. Or, if they are unclear, use a distributor with at least a large supply chain network and a track record of delivery and readiness.
This makes it easier to modify and expand in the future, preventing unnecessary downtime and refurbishment.
Conclusion
In the complex world of electrical systems, power lines and cables are the lifelines that power and interconnect our modern world. From low-cost single-conductor cables used in our homes to high-speed fiber-optic cables that facilitate global communication, each cable has a specific application The choice of cable depends on factors such as control over consumption, environmental, and performance requirements .
MEP course is one of the best supplementary courses for Mechanical and Electrical stream students. MEP designing will help you to work with Entri.
Click here to learn more about the MEP design course offered by the Entri app! Join now!
Frequently Asked Questions
What is electrical cables and wires?
A wire is defined as one electrical conductor, while a cable is defined as a group of individually insulated wires (conductors) encased together in sheathing. Sheathing is a non-conducting material with protective properties to shield the conducting part of the wire/cable.
Which is better wire or cable?
wire determines the range of applications each is suited for. Wires are mostly used within small-scale applications like electronic devices and home electrical wiring. Cables can serve a much more diverse range of applications like networking, power distribution, and audio-visual transmission.