TNPSC Combined subordinate Service Notification Out

TNPSC Combined Subordinate Services Notification 2023 Out: Check Here

Table of Contents

Tamil Nadu Public Service Commission has recently announced the latest recruitment for Overseer / Junior Draughting Officer, Draughtsman, Foreman Posts. This TNPSC Combined Subordinate Services Notification 2023 will be available on the official website https://www.tnpsc.gov.in/ from 03.02.2023 to 04.03.2023. Read the article to get detailed information about TNPSC Combined Subordinate Services Notification 2023 here.

TNPSC Combined Subordinate Services 2023 Overview
Name of Organization/Exam Conducting Body	Tamil Nadu Public Service Commission (TNPSC)
Official Website	TNPSC
Post Name	Overseer/Junior Draughting Officer in Rural Development and Panchayat Raj Department Junior Draughting Officer in Highways Department Junior Draughting Officer in Public Works Department Draughtsman, Grade – III in Town and Country Planning Department Foreman, Grade-II in Tamil Nadu Small Industries Corporation Limited
Total Vacancy	1083
Application Start Date	3rd February 2023
Last Date to Apply	4th March 2023
Admit Card Release Date	To be announced
Exam Date	27th May 2023
Location	TN Govt Jobs

TNPSC Combined Subordinate Services Vacancy 2023

A total of 1083 vacancies have been released. Candidates can check out the distribution of the vacancies as per the post from the table provided below.

Sl.No.	Name of the Post	No. of vacancies
1.	Overseer/Junior Draughting Officer in Rural Development and Panchayat Raj Department	794
2.	Junior Draughting Officer in Highways Department	236
3.	Junior Draughting Officer in Public Works Department	18
4.	Draughtsman, Grade – III in Town and Country Planning Department	10
The following post included as per the Tamil Nadu Public Service Commission (Additional Functions) Act, 2022 (Act No. 14 of 2022)
5.	Foreman, Grade-II in Tamil Nadu Small Industries Corporation Limited	25
Total		1083

TNPSC Combined Subordinate Services Notification 2023

Tamil Nadu Public Service Commission has recently released the latest recruitment online for the posts of Overseer / Junior Drafting Officer, Draftsman, Foreman. This TNPSC CESSE Notification 2023 will be available on official website from 03.02.2023 to 04.03.2023.

TNPSC Recruitment 2023 Apply for 1083 CESSE Vacancies in Tamil Nadu. Officials of Tamil Nadu Public Service Commission have recently published a notification to fill up 1083 posts through online mode. All Eligible aspirants can visit official website of TNPSC Jobs i.e., tnpsc.gov.in Recruitment 2023. Last date to apply online is 04.03.2023.

Download TNPSC Combined Subordinate Services Notification PDF – Tamil

Download TNPSC Combined Subordinate Services Notification PDF – English

TNPSC Combined Engineering Subordinate Services Registration Online 2023

To initiate the online application process you must fill in the essential details on the Official Website. Below are the steps illustrated for the same:

Go to the Official Website at TNPSC
Click on “Notification”, then jump to the top notification of TNPSC Combined Engineering Subordinate Services.
Click on the “Apply Online”.
Start filling up the essential details such as Name, Father’s Name, Date of Birth, Phone number, Email Address, etc.
Click on the “Submit” button.
After the OTP Verification. You will receive a confirmation email with credentials for your account. Keep it safe for future reference.

TNPSC Combined Engineering Subordinate Services Application Fee 2023

Candidates belonging to the UR category can check out the fees they have to pay while applying from the below table.

Registration Fee	Rs. 150/-
Application Fee	Rs. 100/-

Check out the expected application fee in the table below.

Category	Concession
Scheduled Castes/ Scheduled Caste (Arunthathiyars)	Full Exemption
Scheduled Tribes	Full Exemption
Most Backward Classes / Denotified Communities	3 Free Chances
Backward Classes	3 Free Chances
Ex-Servicemen	2 Free Chances
Persons with Benchmark Disability	Full Exemption
Destitute Widow	Full Exemption

TNPSC Combined Engineering Subordinate Services Selection Process 2023

The selection of the candidates will based on their performance in the below mentioned three stages.

Written Examination
Certificate Verification
Counselling

Certificates Needed for Candidate Verification

Candidates must be ready with the following documents for the candidature verification round. The candidate is subjected to rejection if there are any discrepancies found by the commission in the claims made by the candidate.

Birth certificate
Identity proof like PAN card, AADHAR card, Driving License, etc.
Two characters and conduct certificate
Proofs of education qualification
Certificate of qualification in Tami language
Registration certificate
Community certificate as per the norms
No objection certificate
Medical certificate in case of disability

TNPSC CESSE Eligibility 2023

Candidates applying for the application process must have knowledge of eligibility criteria. It will help them to know if they are eligible for the post or not.

TNPSC CESSE Age Limit

Check out the below table to know the maximum age limit required for TNPSC CESSE.

Sl. No	Name of the Post	Maximum Age
Sl. No	Name of the Post	Others [Applicants not belonging to SCs, SC(A)s, STs, MBCs/DCs, BCs and BCMs] (Should not have completed)	SCs, SC(A)s, STs, MBCs/DCs, BCs, BCMs and Destitute Widows of all castes (Should not have completed)
1.	Overseer/Junior Draughting Officer in Rural Development and Panchayat Raj Department	37 years	No maximum Age Limit
2.	Junior Draughting Officer in Highways Department	32 years	SCs/SC(A)s/STs -35years MBCs/DCs / BCs/BCMs-34years
3.	Junior Draughting Officer in Public Works Department	32 years	37 years
4.	Draughtsman, Grade – III in Town and Country Planning Department	32 years	37 years
5.	Foreman, Grade-II in Tamil Nadu Small Industries Corporation Limited	32 years	No maximum Age Limit

Educational Qualification

Check out the below table to understand the required Educational qualifications for each post.

Sl.No.	Name of the Post	Educational Qualification
1.	Overseer/Junior Draughting Officer in Rural Development and Panchayat Raj Department	Must possess a Diploma in Civil Engineering: Provided that preference shall be given to the persons possessing a Bachelor’s degree in Civil Engineering from any University or Institution recognized by the University Grants Commission.
2.	Junior Draughting Officer in Highways Department	A Diploma in Civil Engineering or its equivalent from any University or Institution awarded by the State Board of Technical Education and Training of the concerned State Government; Provided that while making an appointment by direct recruitment to the post of Junior Draughting Officer, preference shall be given if other things being equal, to those who have undergone one year of apprenticeship training under the Government of India Scheme or the State Government Apprenticeship Scheme.”
3.	Junior Draughting Officer in Public Works Department	Diploma in Civil Engineering awarded by the State Board of Technical Education and Training, Tamil Nadu or its equivalent qualification recognized by the Director General of Employment and Training, Government of India or by the All India Council for Technical Education; (OR) Diploma in Architectural Assistantship awarded by the State Board of Technical Education and Training, Tamil Nadu or its equivalent qualification recognized by the Director General of Employment and Training, Government of India or by the All India Council for Technical Education
4.	Draughtsman, Grade – III in Town and Country Planning Department	(i)Must possess Post Diploma in Town and Country Planning awarded by the Government of Tamil Nadu. Experience: Nil. (OR) [(ii) Must possess Diploma in Civil Engineering awarded by the State Board of Technical Education and Training or (iii) Must possess Diploma in Architectural Assistantship awarded by the State Board of Technical Education and Training Or (iv) Any other Qualification Equivalent to the qualifications mentioned in (ii) or (iii) above] Experience: Experience in the field of Civil Engineering for not less than 3 Years
5.	Foreman, Grade-II in Tamil Nadu Small Industries Corporation Limited	A Diploma in Mechanical Engineering / B.E., Mechanical Engineering preferred.

Knowledge in Tamil

Candidates must possess adequate knowledge of the Tamil language. Candidates must also possess a certificate for the same.

Certificate of Physical Fitness

Candidates selected for the TNPSC CESS post will have to produce a certificate of physical fitness prior to joining in the prescribed form given on the TNPSC website. The certificate is to confirm their standard of vision and physical fitness.

Standard of Vision

Form of Certificate of Physical Fitness

Standard III or Better

Colour Blindness and Night Blindness will be a disqualification

Form prescribed for other than Executive and Ministerial posts.

TNPSC CESS Syllabus 2023

The candidates preparing for the TNPSC Combined Subordinate Service 2023 can find the detailed instructions on the syllabus as given below:

Paper – I Syllabus

CIVIL ENGINEERING (DIPLOMA STANDARD) (Objective Type)
Unit -1 Engineering Mechanics	Direct Stresses and strains (Tensile and compressive) due to Axial forces Deformation of elastic bar due to uni-axial force. Shear force and bending moment diagrams for statically determinate beams. Geometrical properties of sections Stresses in beams due to bending Stresses in shafts due to torsion Pin jointed perfect frames with vertical loads on nodal points (method of joints only).
2- Mechanics of Structure	Deflection of cantilever and simply supported beams. Shear force and bending moment diagrams for statically indeterminate structures (Propped cantilever, Fixed Beams, continuous beams, Non- sway Portal frames) using Mohr’s theorems and moment distribution method. Euler’s and Rankin’s formula for columns Stresses due to eccentric loads Combined stresses due to direct loads and bending moments in rectangular sections.
Unit – 3 Construction Materials & Construction Practice	Bricks Tiles Cement Fine Aggregate Coarse Aggregate Timber Plywood Steel Glass Plastics PVC UPVC Paints Mortars Concrete Different types, qualities, requirements, standard specifications, Admixtures for cement mortar and concrete. Different types of Foundations, Masonry, Floors, Roofs, Doors, and Windows, Weathering Course, Damp proof course, Plastering, Painting, Colour Washing Specifications for different works.
4 Transportation Engineering	Roads Different types methods of formation of water-bound macadam, bituminous and concrete roads Hill roads Requirements Camber, gradient, superelevation, carriageway, pavements, drainage system, sight distance, etc., Traffic Engineering, Bridges Classification of bridges – Site selection and alignment – Foundation, substructure, and superstructure. Sub-grade soil Soil mass as a three-phase system Grain size classification – Atterberg limits IS Classification of soil Compaction Shear strength Road Arboriculture Express Highways Rapid Transport System.
5. Hydraulics	Measurement of pressure in liquids Pressure distribution and total pressure on immersed surfaces Types of flow (Laminar, turbulent, steady, unsteady, uniform, nonuniform) Flow-through pipes Losses Hydraulic gradient and total energy lines. Bernoulli’s theorem use of Orifice, Mouthpiece, Orifice meter and Venturimeters Flow-through channels Bazin’s and manning’s formula Economical sections for open channels Pumps Reciprocating pumps Centrifugal pumps Characteristics Discharge Power and efficiency Groundwater Types of well Test for a yield of wells
Unit – 6 Surveying	Types of Surveys Chain surveying Compass surveying Leveling Contour surveying Theodolite surveying Trignometrical leveling Tacheometry Fieldwork Simple problems. Curves Global Positioning System (GPS) Remote sensing Photogrammetric Surveying and Hydrographic Surveying Total Station and Geographical Information System (GIS).
Unit – 7 Environment Engineering and Pollution Control	Sources of Water Conveyance of water Treatment of water Quality of water Tests on water Distribution systems Sewers Collection and conveyance of sewage Sewer Appurtenances Drainage arrangements and Sanitary fittings in buildings Treatment and disposal of sewage, Solid waste Management. Environmental pollution Air water Soil Noise Pollution Control.
8. Estimating and Costing	Systems of taking out quantities Trade and Group systems Material requirement for different items of works Preparation of data for works Report writing Valuation of buildings and properties Fixation of rents Approximate estimates Detailed estimate and Abstract estimate for buildings, well, sump, septic tanks, compound wall, roads, etc.
9 Structural Engineering	Reinforced cement concrete structure Analysis and design of singly and Doubly reinforced rectangular and T-beam sections Cantilever, simply supported, continuous beams One way and two-way slabs Lintels and sunshades Staircases Rectangular and circular short columns Isolated column footings. (All designs by Limit State Method only). Steel structures simple beams Tension and compression members simple columns.
Unit – 10 Construction Management	Planning of a project Factors to be considered Project reports Organization structure on construction departments Construction planning CPM and PERT networks Contracts Tenders and Tender documents Bill Supervision and Quality control Safety measures in construction sites Banking practice Cash flow diagrams. Entrepreneurship, Ethics in Engineering, Use of computers Information Management, Financial Management, Disaster Management Types of Natural calamities Causes for a major disaster Preparedness Response and Recovery

Paper II Syllabus

Architectural Assistantship (Diploma Standard)
Unit- 1 Engineering Mechanics	Simple Stresses and Strain Stress and Strain Modulus of Elasticity / Elastic constants Application of stress and strain in the engineering field The behavior of ductile and brittle material Loads Shear Force and Bending Moment Geometrical properties of sections Centroid Moment of Inertia Stress in Beams and Shafts Stresses in Beams due to bending Stress in shafts due to torsion Pin Jointed Frames Analytical Method Graphical Method.
2 Building Materials and Construction	Properties, characteristics, strengths, manufacturing, components & applications of materials & methods of construction & detailing for the following: Stone Brick & Clay Products Lime Cement Timber Concrete Ferrous and Non-Ferrous Metals Glass Plastics Asphalt, Sealants & Adhesives Protective and Decorative Coatings Water Proofing and Damps Proofing Materials Rural Building Materials(Bamboo, Soil, etc.).
Unit -3 History & Theory of Architecture	History of Architecture Egyptian Architecture Greek Architecture Roman Architecture Early Christian & Byzantine Architecture Gothic Architecture Renaissance Architecture. Indian Architecture Indus Valley Civilization Buddhist Architecture, Hindu Architecture Islamic Architecture in India. Modern Architecture, Post Modernism, Deconstructivism Contemporary World Architecture Theory of Architecture Definition of Architecture – Architecture as satisfying functional, aesthetic & psychological human needs. Elements of Architecture – Form, Space, Light, color, etc. Principles of Architecture – Proportion, Balance, Scale, Symmetry, etc.
4 Structural Engineering	Slope and Deflection of Beams Propped Cantilevers Fixed Beams Arches Continuous Beams The theorem of Three Moments Continuous Beams Moment Distribution Method Columns and Struts Combined Bending and Direct Stress Earth Pressure and Retaining Walls Working Stress Method Design of Beams for Flexure by L.S.M Design of T-Beams and Continuous Beams by L.S.M Design of Beams for Shear by L.S.M Design of One-way Slabs by L.S.M Design of Two-way Slabs by L.S.M Design of Staircases by L.S.M Design of Columns by L.S.M – Design of Column Footings Design of Simple Beams Design of Tension Members Design of Compression Members Design of Welded Connections.
Environmental Engineering	Sources of Water Collections and Conveyance of Water Quality of Water Treatment of Water Distribution System Appurtenances and Maintenance of Water Lines Collections and Conveyance of Sewage Treatments and Disposal Environmental Pollution and Control Industrial Waste Water Treatment and Solid Waste Disposal Land, Water & Air Pollution.
Building Services	Water Supply & Sewage Disposal Mechanical Systems Pumps & Motors, Electrical Systems Generation & Distribution Ventilation & Lighting Air Conditioning Principles Systems & applications Vertical Transportation systems Fire Hazards Safety & Design Regulations Acoustics
Unit- 7 Site Survey & Planning	Chain Surveying Compass Surveying Plane Table Surveying Leveling Theodolite Contouring Minor Instruments. Site Drawings Site marking, Importance & procedures for making site drawings & dimensioning.
Unit – 8 Specification & Estimation	Stages of Detailed Estimate Measurements & Material Requirement Specification & Report Writing Approximate Estimates Areas and Volumes Data Valuation Detailed Estimate
Unit – 9 Town Planning	Town Planning Principles Road and Street Planning Housing Economy, Society, Environment, and Transport Policy and Planning Town Planning Rules, Building Bye-Laws & Development Control Rules.
10 Computer-aided Drafting and Visualization	2D & 3D Drafting & Visualization Using AutoCAD, etc Setting limits and creating entities like LINE, ARC, CIRCLE, etc Editing the drawing with edit commands like TRIM, FILLET, COPY, MOVE, etc., Creating 2D building working drawings. Visualization using SKETCH-UP, 3DMAX, etc.

TNPSC CESS Exam Pattern 2023

In the given table we have the structure of the TNPSC Combined Engineering Subordinate exams pattern. This will give the candidates an idea of how to approach the exams and how much weightage they should give to each topic-

Subject	Duration	Maximum marks	Minimum Qualifying Marks for Selection
			SCs, SC(A)s, STs, MBCs/DCs BC(OBCM)s & BCMs	Others
Paper –I(Objective Type) (Subject Paper) (200 questions) (Diploma Standard) Any one of the following subjects 1. Civil Engineering(Code No.299) 2. Architectural Assistantship (Code No.323) 3. Town & Country Planning (Post Diploma Standard)(Code No.325) 4. Mechanical Engineering (Code No.255)	3 Hours	300	135	180
Paper – II (200 Questions) Part-A Tamil Eligibility Test (SSLC Std.) (100 questions/150 marks)	3 Hours	Note: • Minimum qualifying marks – 60 marks (40% of 150) • Marks secured in Part-A of Paper-II will not be taken into account for ranking.
Part-B (General Studies) (100 questions) (150 marks) (Code No:003) General studies (Diploma Standard) – 75 questions and Aptitude and mental ability test (SSLC standard) – 25 questions		150
Total	6 hours	450

Salary

Sl.No.	Name of the Post	Scale of Pay
1.	Overseer/Junior Draughting Officer in Rural Development and Panchayat Raj Department	Rs.35400-130400/- Level 11 (Revised Scale)
2.	Junior Draughting Officer in Highways Department
3.	Junior Draughting Officer in Public Works Department
4.	Draughtsman, Grade – III in Town and Country Planning Department
5.	Foreman, Grade-II in Tamil Nadu Small Industries Corporation Limited	Rs.19500-71900/- Level 8 (EPF Contribution)

TNPSC Combined Engineering Subordinate Services Cut Off

The table below shows the expected cut for TNPSC Combined Engineering Subordinate Services exams 2023 as the result is yet to be declared, the candidate can have a glance over the same to follow the trend of exams-

Category	Expected Cut-Off Marks
SCs, SC(A)s, STs, BC(OBCM)s, MBCs/DCs and BCMs	150
Others	200
SCs, SC(A)s, STs, BC(OBCM)s, MBCs/DCs and BCMs	150
Others	200