Table of Contents
The world of civil engineering and construction is diverse, vast and constantly evolving. Architects and engineers use a variety of techniques and materials to create reliable and durable structures. RCC is a construction material made from small pieces of concrete, embedded in steel mesh, typically less than 6 square inches in area. This mesh acts as a reinforcement to make the concrete stronger and more resistant to damage.
RCC: Full form
Full form of RCC is cement reinforced concrete. It is a composite material made from steel and concrete. It is a central element of modern construction due to its light weight and ease of use, especially for infrastructure, buildings and bridges. In addition, RCC fibers are woven into the concrete before it is poured. They also help distribute stress and pressure evenly throughout the material. This makes RCC less likely to break or crack under stress and has better ability to withstand compressive loads. It is even more durable than traditional concrete, allowing it to last for a long time without needing to be replaced or repaired.
How does RCC work?
Reinforced cement concrete is a building material that is primarily made up of Portland cement, steel reinforcement, and rebar. The RCC mixture is poured into molds and fired at high temperatures. This process causes the cement to expand and creates a strong bond between the individual particles. The resulting material is therefore very durable and resistant to damage and deterioration. This is one of the most important developments in the construction industry in recent decades.
RCC structures are designed in such a way that both components can easily withstand the forces acting together. The tensile strength of the steel and the compressive strength of the concrete in RCC form a strong bond to resist and withstand the stresses caused by wind, vibration or other forces.
Reinforced Cement Concrete (RCC): Types
Some of the most commonly used RCC types are described below:
Polymer concrete
This type of RCC is produced by completely replacing the hydrated cement binder of the conventional cement concrete binder with a polymer binder. It has better abrasion resistance, strength, adhesion and chemical resistance than conventional cement concrete. The hardening of this type of concrete occurs mainly due to polymerization of the binder at medium temperature.
Fibre reinforced concrete
These types of concrete are mainly used as road overlays and modern buildings. The fibers used in this type of RCC are steel fibers, organic fibers, and mineral fibers. All the concrete sections are constructed with high FRC and have equivalent tensile strength. In addition, the use of steel or alternative fibers instead of steel bars for reinforcement reduces the overall cost.
Ferrocement concrete
Ferrocement concrete is made by combining cement mortar with metal mesh. It is a lightweight and highly flexible reinforced concrete that can be manufactured into any desired shape. It is one of the preferred options due to its longevity, material cost, ease of construction, and better earthquake resistance.
Engineering Upskilling Courses
|
MEP Course |
Structural Design Course |
Uses of RCC
Reinforced concrete is a construction material consisting of concrete and reinforcing fibers embedded in a matrix. This base typically includes a plasticizer, hardener, and sand or gravel filler.
Reinforcement allows concrete to withstand tensile and shear stresses, making it an essential component of many construction projects. RCC is most commonly used in the construction of buildings and other structures. It can sometimes be used in place of steel beams and columns.
Reinforced cement concrete is often used in construction because it is strong and durable. It can withstand tensile and shear stresses, making it an essential part of many construction projects.
RCC is commonly used in the construction of buildings and other structures, but it can also be used in bridges, roads, and other infrastructure projects.
The use of RCC has increased in recent years because its properties make it a very versatile construction material. It can be used for both structural and non-structural purposes, making it a desirable choice for many projects.
Here are some of the most common applications of RCC:
Reinforced concrete bridges and overpasses: Because RCC is durable and resistant to damage, it is often used in bridge and overpass projects. This makes it a popular choice for projects that require high durability and performance.
Buildings: RCC is commonly used in projects because its properties make it an efficient and cost-effective option. It can withstand a lot of stress and abuse, making it a good choice for buildings that need to withstand harsh weather conditions or heavy use. This material is durable and can resist deep cuts and cracks, making it an ideal building material for complex construction sites.
- Reinforced concrete bridges are used to support heavy traffic loads and resist earthquakes.
- RCC is used in buildings to make them more earthquake resistant.
- RCC is also the main construction material for stadiums and other large sports facilities.
RCC: Advantages and disadvantages
Advantages | Disadvantages |
RCC has better tensile and compressive strength when compared to other building materials. | The tensile strength of RCC is only about 1/10th of the compressive strength. |
The buildings constructed with RCC are more durable than other buildings. | Several steps are involved in constructing an RCC building, such as casting, mixing, and curing. However, if these steps are not followed properly, the RCC’s final strength may be altered. |
RCC can be easily molded into any shape before hardening its mix. | Installing and removing RCC formwork before and after pouring concrete is an additional cost. |
RCC buildings have better fire resistance than steel structures only. | After hardening, shrinkage in RCC buildings may cause strength loss or crack development. |
RCC buildings offer long life and low maintenance costs. | |
The RCC building construction requires fewer skilled workers than traditional construction. |
Advantages of RCC
The most important advantage is that reinforced concrete can be much more durable than traditional concrete. This is because steel reinforcement helps the material resist damage from earthquakes, wind, and other forces.
Another advantage of reinforced concrete is its ability to withstand heavier loads. This is due to the use of thicker layers of material, resulting in a stronger structure. In addition, reinforced concrete is easier to repair than traditional concrete. This is because it has fewer joints and less opportunity to expand or contract.
Reinforced concrete is an engineering material made from concrete and steel reinforcement. Reinforcement makes concrete stronger, more durable, and less likely to crack or crumble under pressure.
One of the most important advantages of using reinforced concrete is that it can save time and construction costs. RCC can be used when other construction materials cannot withstand the weight or pressure of the building.
Additionally, because RCC is an engineered material, it can be customized to specific needs. This means that it can be designed to look different from traditional concrete buildings, making the project more visually appealing.
- It is stronger and more durable than traditional concrete.
- It is easier to work with because it has a higher compressive strength and can be cast more easily and quickly.
- It is more environmentally friendly because it does not require as much energy to produce and can often be recycled or reused.
Disadvantages of RCC
Reinforced concrete has been a widely used building material for over 100 years. However, its use has some disadvantages. One of the main disadvantages of reinforced concrete is that it is susceptible to brittle failure. This is due to the fibrous reinforcement, which can fail due to stress concentrations near the point of failure.
When this occurs, the structural integrity of the building is compromised and can result in serious injury or death. In addition, RCC is an expensive building material and has a relatively short lifespan compared to other types of construction.
RCC construction vs Traditional construction
Traditional construction
Traditional construction has long been a standard method that relies heavily on natural materials such as clay, stone and wood. Structures built using traditional techniques can vary in shape and size and can last for several years. It is a longer construction method and causes more disruption to surrounding areas.
RCC construction
RCC construction has seen great advancements in recent years, offering increased durability and improved designs. It is said to have better sound insulation and cost-effective construction methods. It even incorporates advanced materials like concrete, steel and glass. This method is also considered to be one of the eco-friendly construction options.
Some of the project types of RCC Construction are well-suited include:
- Dams & bridges
- Multi-story buildings
- Retaining walls and more
Innovation and rends of RCC Constructions includes:
- 3D printing in construction helps in creating RCC structures more efficiently and quickly.
- High-Performance Concrete (HPC)
- Automation and robotics are highly used in RCC construction to reduce manpower demands and enhance efficiency.
RCC structures are perfectly designed by engineers prioritizing factors like seismic stability, wind resistance, load bearing capacity, etc. Engineers integrate the best safety features into the RCC construction process to ensure that the structures are safely supported and can withstand all the elements of nature.
Conclusion
Frequently Asked Questions
What is RCC full form?
RCC full form is Reinforcement Cement Concrete. It is a construction material made from reinforcement and cement, typically concrete or steel.
Where is the RCC full form used?
It is widely used to build skyscrapers, bridges, multi-story buildings, and other large structures.
What is the main advantage of using RCC full form in construction?
The main advantage of using RCC is its ability to resist earthquakes and other natural disasters with low maintenance.
What is RCC full form in civil engineering?
RCC is a type of concrete that is reinforced with wire mesh and fibers to improve durability and strength. It is being used in a variety of applications including civil engineering projects.