Kerala PSC KSDC Tracer Syllabus 2025 PDF: Get Exam Pattern

Kerala PSC KSDC Tracer Syllabus 2025 PDF

Download the official Kerala PSC KSDC Tracer Syllabus 2025 PDF to start your preparation with the most updated exam topics. The syllabus covers all essential subjects and exam pattern details, helping you plan your study strategy effectively.

Click the link below to access and download the syllabus in PDF format.

Kerala PSC KSDC Tracer Exam Date 2025

The Kerala PSC KSDC Tracer Exam is scheduled to be held on July 23, 2025. Candidates are advised to mark the date and begin their final phase of preparation. Make sure to revise the syllabus thoroughly and stay updated with official notifications regarding the admit card and exam guidelines.

Kerala PSC KSDC Tracer Exam Confirmation Date 2025

The Kerala PSC has officially confirmed the KSDC Tracer exam for candidates who applied between 22/04/2025 and 11/05/2025. All eligible applicants are advised to start their preparation based on the updated syllabus and exam pattern. Stay tuned for further updates and instructions from the PSC.

Kerala PSC KSDC Tracer Admit Card 2025 Date

The Kerala PSC KSDC Tracer Admit Card 2025 will be released on July 09, 2025. Candidates can download the admit card from their PSC profile by logging in with their credentials. Make sure to check all details mentioned on the admit card, including exam center, timing, and instructions. Carry a printed copy of the admit card along with a valid ID proof to the exam hall.

Kerala PSC KSDC Tracer Exam Pattern 2025

The Kerala PSC Tracer Exam 2025 will be conducted either in OMR or Online mode, based on the final decision of the commission. This recruitment is for direct appointment to the Kerala State development coperation on a statewide basis. The exam will be for 100 marks and held over a duration of 1 hour 30 minutes. The question paper will be in English medium.

PREPARE FOR CIVIL TECHNICAL EXAMS!

Kerala PSC KSDC Tracer Syllabus 2025: Detailed

MODULE 1: BASIC ENGINEERING DRAWING (8marks)

Drawing instruments, Uses, Layout of drawing sheet, Types of lines, Lettering, Dimensioning, Types of Scales, Plane geometrical construction, Conic section, Projection.

MODULE 2: BUILDING MATERIALS AND CONSTRUCTION (12marks)

Properties of engineering materials, Building Stones, bricks , lime, timber, tiles , sand, cement mortar and concrete, Admixtures, Ferrous metals, Non ferrous metals, Glass, Protective materials.

MODULE 3: BUILDING CONSRTUCTION (20 marks)

Stone masonry, Brick masonry, composite masonry, Foundation, Bearing capacity of soil, Scaffolding shoring and underpinning, Damp proofing water proofing and termite proofing, Arches, lintels, stairs, RCC -introduction, uses materials proportions Formwork including bending of bars and construction. reference of BIS code, RCC lintel, column, slab, beam, footings, Method of mixing concrete, slump test Steel structures – Common forms of steel sections, Tension and compression member, Types of riveted joints, welded joints, Doors and windows, Roofs, Floors and floorings.

MODULE 4: BUILDING DRAWING AND ESTIMATING (12marks)

Building rules and byelaws, Provision of safety for buildings , types of estimate, Sanctions, , Rules and methods of measurements of works, Rate analysis, labour, materials, schedule of rates, Valuation- terms.

MODULE 5: IRRIGATION ENGINEERING (6marks)

Terms used in irrigation, Water requirements of crops, Wiers and barrages, storage and diversion headwork, Reservoir, Dams, Canals, Cross drainage works, Hydroelectric projects and Turbines.

MODULE 6: SURVEYING (14 marks)

Chain surveying- principles-instruments used , Filed book plotting, compass surveying, Planetable surveying, Levelling and contouring, Curves, Theodolite – Area and volume calculation

Introduction to total station ,Types of total station , Measurement with total
station ,Charecteristic and features of Total station , Global positioning
systems

MODUL 7: AutoCAD ( 8marks)

Inroduction , Basic commands, Tool bars, Function keys and shortcu keys, 2D drafting, 3D modelling-shortcut keys, knowledge of layout and printing drawing

MODULE 8: UNITS OF MEASUREMENTS AND APPLIED MECHANICS ( 6 marks)

Units of measurements, Simple machines, work, power, energy, simple stress, strain, Mensuration, simple trigonometry.

MODULE 9: TRANSPORTATION ENGINNERING (8 marks)

Road, Development of road, General principles of alignment, Classification and construction of different types of roads, Railway engineeringType of rail sections , Permanent way, Sleepers Ballast, Fixtures and fastenings, Creep – Screw spikes – Washers Rail sections, signalling Points and crossings, Bridge engineering- Foundation of bridges, Super structure of bridges and classification of bridges.

MODULE 10: PUBLIC HEALTH AND SANITATION (6 marks)

Pipes and pipe joints for underground drainage ,Quality of water, Sources of water, Treatment and conveyance of water, Distribution of water, Systems of sanitation, house drainage, collection and conveyance of sewage, Septic tank, water and sewage treatment plant, Sewer appurtenances, waste water disposal.

How to Download Kerala PSC Tracer Syllabus 2025 PDF

​To download the Kerala PSC KSDC Tracer Syllabus 2025 PDF, please follow these steps:​

1. Visit the official Kerala PSC website: www.keralapsc.gov.in
2. Navigate to the Downloads section.
3. Click on Syllabus.
4. Locate and select the Tracer Syllabus link.
5. Click on the provided download link to access the PDF.

Study Tips to Crack the Kerala PSC Tracer Exam 2025

• Understand the Syllabus: Focus on key areas mentioned in the official syllabus.
• Time Management: Practice solving questions within the exam’s time limits.
• Previous Year Papers: Solve them to understand the question pattern.
• Mock Tests: Take regular mock tests to improve speed and accuracy.
• Focus on Technical Subjects: Prioritize drawing, surveying, and building plans.
• Current Affairs: Stay updated on relevant news, especially related to Kerala and public works.
• Consistent Study: Revise topics regularly and stay disciplined in your preparation.